Mobeye MS300 Water Detector
The Mobeye MS300 is a GSM water detector and controle module. It detects the presence or absence of water-based liquids. Because of its autonomous operation, the MS300 water detector can be used at any desired place.
Once the float sensor is closed by the water pressure, the GSM water detector sends alarm messages via SMS and / or telephone call to (max. 5) contact numbers. In addition, devices can be controlled via the two relay outputs.
The MS300 can run battery-operated, for a long time. In this ‘low power’ status it monitors the connected sensors. In an alarm situation the unit alarms the contacts (SMS/call) and controls the outputs. It has a 9-32VDC power input. When external powered, the GSM remains open and the MS300 is accessible for remote programming and controlling.
The Mobeye MS300 is equipped with a water level sensor. To the second input another float level switch can be connected. In this way a second water level can be monitored, or any other sensor. The two output relays can be used to switch devices after an alarm situation or remotely, for example to control a water pump.
The behaviour of the GSM Water Detector and Controle Module is programmable via the keypad or using simple SMS commands. By adjusting the action-reaction patterns, the behaviour of the inputs, outputs and the GSM unit can be set up according to your preferences.
- Alarm messages by SMS and / or call
- Repeat notifications period chosen after themselves
- Restore messages via SMS and / or call
- Switching of the output relays after an alarm (on / off or during time period)
- Switching of the output relay after recovery of alarm (on / off or during time period)
- Switching of the output relay through (authorised) incoming call or SMS
- Test reports on self-chosen intervals
- Battery-low notification
Typical applications for the Mobeye MS300 Water Detector
The Mobeye MS300 is a powerful GSM telemetry module which is ready-to-use thanks to its default settings. For advanced system integrators it offers extensive customisation options. The GSM water detector can measure any dry contact signal and convert it into a GSM signal and/or to control connected devices. This makes the module suitable for monitoring water pumps, swimming pools, at construction sites and for the marine sector.
Typical applications for the Mobeye MS300 include:
- storage locations
- drainage systems
- pump houses
- construction sites