Mobeye WaterGuard CM4300 Water Leak Detector & Alarm

Brand: Mobeye

 245,00 ( 202,48 excl. VAT)

In stock.

The Mobeye WaterGuard CM4300 is a water detector designed to prevent water damage and other water problems caused by water leaks. Leakages can no longer go unnoticed when the leakage sensor is placed near a water source or in a location where water may accumulate. The device can operate entirely on batteries or may require external power.

Read full description»

Communication module

4G LTE-M, 2G Fallback

Inputs

2x NO/NC inputs, leakage sensor

Power input

battery-operated (with option to connect 12-24 VDC)

Batteries

2x CR123 (lithium 3,0V) included

Dimensions

94 x 94 x 28 mm

Share On:

Description

Mobeye WaterGuard CM4300 Water Leak Detector

The Mobeye WaterGuard is a water leak detector designed to prevent damage from leaks and subsequent water problems. This device comprises a reliable leakage sensor and a compact communication box. Placing the leakage sensor near a water source or in areas prone to water accumulation ensures that leaks no longer go unnoticed. When the sensor detects water-based liquid, it triggers an alarm notification. The device is powered either by batteries or an external power source. The built-in communication module can connect to both the 4G LTE-M and 2G networks.

In the event of an alarm, the Mobeye WaterGuard sends alarm notifications through the Mobeye Messages App (available for both iOS and Android), telephone calls (voice messages), text messages, and/or email. Contact persons can be configured, offering multiple options for the alarm message.

The Mobeye WaterGuard can run for over a year on a single set of batteries. When the battery voltage is low, a warning message is sent. In cases where an external power source (12-24V DC or mains) is utilised, the device also sends “power failure” notifications. This often serves as the initial indicator of an issue, prompting the need for immediate action.

Mobeye WaterGuard, reliable and simple

Next to the supplied leak sensor, two potential-free sensors can be connected, for example a water float sensor or failure contact. Configuring the settings is a straightforward process, allowing for customisation of alarm delay times, periods of inactivity after an alarm, NO/NC input types, repeat notifications, test messages, and alarm texts.

To monitor water levels, the Mobeye CM4300FS, with float sensor, is a more suitable choice.

How it WorksCM4300-IEX

The Mobeye CM4300 monitors the moisture level in a room. In the event of a water leak, it promptly sends a notification. This ensures that you can detect a water leak in a timely manner and prevent water damage or other water problems.

  1. Place the box in a dry place and set the contacts for the notifications.
  2. Fix the leak sensor where the water first will penetrate or accumulate, with the pins down.
  3. As soon as the pins feel water, the WaterGuard sends alarm messages to the contact persons. For the push messages there is a choice between an escalation plan or group message. With the escalation plan, the recipient can confirm the push message, so that the other contacts no longer receive the message. If none of the recipients confirms the push message, a phone call is made. The number of contacts is unlimited.

Mobeye SIM, Portal & App service

The Mobeye Internet Portal provides a user-friendly dashboard with essential features, including push notifications through the app, online programming, configuring notifications, accessing status and history, monitoring network strength, events, and position (Cell-Id). The ‘keep-alive’ monitor enhances security by overseeing the receipt of test messages. Activation of the Mobeye SIM card can be conveniently done online.

Typical applications for Mobeye WaterGuard CM4300 water leak detector include:

  • construction areas
  • cellars
  • basements
  • lower level parking garages
  • pump house
  • tunnels
  • ponds
  • drainage systems
  • boats

 


The WaterGuard CM4300 is also available as float switch alarm (Mobeye CM4300FS). Should you seek enhanced functionalities, our suggestion is the Mobeye CombiGuard.


 

Technical Data

Contents

  • CM4300
  • leakage sensor
  • 2x CR123 batteries
  • SIM card

(Alarm) messages

  • water alarm, input alarm, power failure, alarm recovery, battery low voltage, (missed) testreport
  • to private contacts via app, call, text message and/or e-mail

Reporting

  • status, setting list, event history, network strength and position based on Cell ID

Setting options

  • contacts (unlimited number) for alarm and service messages, message texts, repeat cycles, input type normally open or normally closed, recovery messages, alarm delay times, test interval (keep-alive), ARC, etc.

Operation

  • arming and disarming via button, time schedules and SMS

Water sensor

  • 52 x 32 x 14 mm, digital, 1 meter cable

Inputs

  • 1x input for leakage sensor
  • 2x NO/NC input (potential-free)
  • 1x 12-24V DC (+/- 2V)

Power supply

  • 2x CR123 lithium batteries or 12-24V DC (regulated) + 2x CR123 lithium

Battery lifetime

  • > 1 year at normal use (battery operated)
  • > 3 years at normal use (powered externally)

Dimensions

  • 94 x 94 x 28 mm

Connectivity

  • 4G LTE-M (worldwide) + 2G EGSM Quad band

The Mobeye SIM card and Internet Portal provide full functionality and optimum security. The 4G LTE-M network is very reliable and ensures a strong penetration against low energy consumption. 2G is available as a fallback.

  • 2G EGSM Quad band (850/900/1800/1900 MHz)

When using your own SIM card, the device works (only) on 2G. The operation is “stand-alone”, without using the Mobeye Portal. The alarm notifications are sent via SMS and telephone call to (max.) 5 contacts. Programming is done via (simple) SMS commands.

Accessories (not included)

  • mains adapter
  • extension cable (3m, 10m)
  • external antenna

Mobeye SIM, Portal & App service

The Mobeye Internet Portal offers a clear dashboard and essential functions, such as push notifications per app, online programming, setting up the notifications, insight into the status and history, network strength, events and position (Cell-Id). The ‘keep-alive’ monitor offers extra security by monitoring the receipt of test messages. You can activate the supplied Mobeye SIM card online.

Downloads

Click to open the documents and find more information:

SIM, Portal & App

All Mobeye monitoring devices require a SIM card for communication. The product comes with a budget-friendly SIM card, which provides direct access to the Mobeye Internet portal. Alternatively, you have the flexibility of using your own SIM card.

SIM
The Mobeye M2M SIM card provides the device with full functionality, allowing access to the Mobeye Internet Portal and App.

With the Mobeye SIM card, communication occurs over the 4G LTE-M network with 2G as a fallback. When you insert your own SIM card, the device utilises the 2G network. Alarm messages are then transmitted via SMS and/or call to a maximum of 5 telephone numbers.

The Mobeye SIM card is PIN-protected and exclusively functions in a Mobeye device. Please refrain from inserting it into another device. For further information about the Mobeye SIM card, visit: mobeye.com/en/sim-cards. The rate for utilising the Mobeye Internet Portal and the SIM card can be found at mobeye.com/en/sim-portal.

Free App for your Smartphone
The Mobeye Messages app is available for download from the Google Play (Android) and Apple App Stores (iOS).

Would you like to use the Mobeye SIM card, but it was not included in your package? Please contact the MobeyeStore team to request one by completing the contact form.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Customers who viewed this product also viewed